The other cell phone jammer of the other brand doesn’t always can do this

To help fill in the worn area without affecting the touch to do more case of the exhaust, with the parting, insert the end of the bone-bit side. Shorter length of the exhaust to do (2 ~ 3mm), followed with a deep exhaust leads to ensure good results. Small outlet has done the end of the exhaust flow can help fill. And the normal work of the nearby base station will not be influenced by cell phone jammer.
First assembly of finished products, within the given method (or other assembly relations) assembly, under the Analysis model anlysis check whether the assembly interference. Projects selected in the TYPE global interference, the other can not change, and then click compute to. When there is interference when, result window will display the product name interference on the screen while a red dot that interfere with site. To have the red dot at the section to do, see details for further examination. Check the suitability of the product assembly space. Check the product and part of the structure is reasonable, for processing, injection of the existence of significant adverse effects. Check that there is a die hard or not the mold, such as in undercut and so on. Check the product text font width is appropriate, whether processing. The other cell phone jammer of the other brand doesn’t always can do this.
First Lieutenant in the Analysis Surface Analysis TYPE is set to Draft chack, surface field is set to part, Angle Option field is set to Both directions, and then set the reference draft angle, select the mold direction of the plane, click Computer, then the system analysis will calculate and display the icon. What aspects of this product available to do the stripping slope. Pay special attention to wear a bit draft angle plug size, usually 2 ~ 5 °. Product and bone-bit (spark direct hit), column-draft angles may test filter. When the need to increase the draft angle, the general principle is that the direction of pull to cut plastic mold, to facilitate future change mode. More than 200m away from the base station, the radius of covering range of cell phone jammer is 20-50m. Electroplating products need to set the circular flow channel, to add after the mold rubber column, its height should exceed the thickness of the product before the mold part 2MM, and each product required to set up garbage in the opposite position into points to make the electroplating finished a solid box;